應用均溫板于非均勻熱物理條件

均溫板(Vapor Chamber)為一兩相流熱傳組件，具有將熱量均勻擴散傳遞的功能，非常適合應用在不均勻發熱的熱源條件上。本文主要即是探討均溫板應用于非均勻發熱的電子組件，如CPU、GPU及LED等，其擴散傳遞熱量的能力。首先利用本文所開發的計算程序VCEK_ML V1及BaseResistance_ML，先行估算均溫板的擴散傳遞熱量的能力，再使用窗口軟件VCTM V1.0配合熱性能實驗，分析整個均溫板模塊在非均勻熱源物理條件的熱流現象，最后可藉由熱顯像儀的溫度分布結果驗證均溫板擴散熱量的傳遞能力。結果顯示，均溫板模塊可有效改善非均勻熱物理條件的熱分布現象，比純銅及純鋁板佳。

 A vapor chamber is a two-phase heat transfer components with a function of spreading and transferring uniformly heat capacity so that it is ideal for use in non-uniform heating conditions. This article mainly researches in vapor chamber application on non-uniform heating electronic components, such as CPU, GPU, and LED, with its ability to spread and heat transfer. Firstly, the calculation program developed in this paper named as VCEK_ML V1 and BaseResistance_ML employ to estimating the ability for spreading and transferring heat amount of vapor chamber. Then the Windows software VCTM V1.0 with the thermal-performance experiment analyzes the thermal phenomena of the Vapor Chamber module in the thermo physical conditions of non-uniform heat source, and finally, a thermal imager can be employed and proved the heat spreading capability of vapor chamber through the temperature distributions. The results showed that, a vapor chamber module can effectively improve the thermo physical conditions of non-uniform heat distribution phenomenon, which is better than pure copper and pure aluminum plates.收起
關鍵詞：均溫板、非均勻熱源、VCTM1.0、熱分布、熱顯像儀 Vapor Chamber Non-uniform Heater VCTM V1.0 Heat Distribution Thermal Imager